[. . . ] Use the appliance only for processing normal amounts of food and for normal amounts of time for domestic use. Do not exceed permitted maximum quantities (X "Application examples" see page 26). The appliance must not be used for processing other substances or objects. Additional applications are possible if the accessories approved by the manufacturer are used. [. . . ] These operating instructions contain a sticker with reference values for the operat ing speed of the appliance when using the tools or accessories. Automatic cord winder: Pull out the cord in one go to the required length (max. Reducing the cord length: Pull gently on the cord and allow it to roll up to the required length. Then gently pull the cord again and slowly release; the cable is locked. If the appliance features an automatic cord winder, do not insert the cord manually. If the cord jams, pull out the cord all the way and then allow it to wind up. WWRisk of injury from the rotating tools While the appliance is operating, never place fingers in the mixing bowl. Do not change tools until the drive has come to a standstill ­ when the appliance is switched off, the drive continues running briefly and stops in the tool change position. Kneading hook (15) for kneading heavy dough and mixingin ingredients that ought not be cut (e. Depending on the processing task, insert the stirrer, whisk or kneading hook until it locks into position. Note: If using the kneading hook, rotate the dough deflector until the kneading hook can lock into position (Fig. Put the ingredients to be processed into Set the rotary switch to the desired setting. our recommendation: ­­ Stirrer: First stir in at setting 1 (1), then select setting 7 (4) ­­ Whisk: setting 7 (4), mix in at setting 1 (1) ­­ Kneading hook: first stir in at setting 1 (1), knead at setting 3 (2) Adding more ingredients Switch off the appliance with the rotary switch. Add more ingredients through the feed After using the appliance Switch off the appliance with the rotary Take the tool out of the drive. WWRisk of injury Do not grip the sharp blades or edges of the cutting discs. Before attaching / removing the continuousfeed shredder, wait until the drive has come to a standstill and pull out the mains plug. Operate the continuous-feed shredder in the indicated operating position only. F: The built-in predetermined breaking point protects the drive of the appliance. If an overload occurs, the drive shaft of the con tinuous-feed shredder breaks. A new disc holder with drive shaft is available from customer service. Designation on the reversible slicing disc: "1" for the thick slicing side "3" for the thin slicing side warning!The reversible slicing disc is not suitable for slicing hard cheese, bread, rolls or choco late. [. . . ] Temperature) ­­ 100-125 g sugar ­­ 1 egg ­­ 1 pinch of salt ­­ A little lemon peel or vanilla sugar ­­ 250 g flour ­­ Baking powder if required Using the stirrer, process all ingredients From 500 g flour: Knead the ingredients with the kneading hook for approx. Basic recipe ­­ 500 g flour ­­ 1 egg ­­ 80 g fat (room temperature) ­­ 80 g sugar ­­ 200-250 ml lukewarm milk ­­ 25 g fresh yeast or 1 packet of dried (10-20 g) cold water as required Process all ingredients for approx. Lemon juice or vinegar ­­ 1 pinch of salt ­­ 1 pinch of sugar Ingredients must be at the same temperature. Process the ingredients (except the oil) in The blender for several seconds at setting 3 (2) or 4 (3). [. . . ]